Convert physical business card dimensions to pixel values. Supports custom DPI settings for both print design and screen display scenarios.

PX to REM Converter
A bidirectional PX to REM converter for front-end developers and designers, featuring customizable root font sizes.

Online JWT Parser & Decoder
Parse JWT headers, payloads, and key information online. No installation required—just paste and decode.

Pixel to Centimeter Converter
Accurately convert pixel lengths to physical centimeter dimensions based on PPI (Pixels Per Inch). Ideal for UI design, print layouts, and screen adaptation.

PX to PT Converter
A pixel (PX) to point (PT) unit conversion tool for designers and developers. Supports custom PPI for typography and layout adaptation.

Pixel to Millimeter Converter
Accurately calculate the physical dimensions between pixels and millimeters based on PPI density. Ideal for UI design and print typography.
Designers often need to convert physical business card dimensions into digital pixel values, but manual calculations can lead to errors. This tool uses the standard conversion formula (Pixels = Millimeters × DPI ÷ 25.4) to accurately convert the physical size of a business card (in millimeters) into the pixel dimensions required for screen or print. Business card sizes typically refer to standardized physical width and height specifications, such as 90 × 54 mm, while DPI (Dots Per Inch) determines the pixel density within a unit of length.
Q: How many pixels is a 90 × 54 mm business card at 300 DPI?
A: 1063 × 638 pixels. The calculation formula is: 90 × 300 ÷ 25.4 ≈ 1063px, and 54 × 300 ÷ 25.4 ≈ 638px.
Q: What is the difference in DPI requirements for print and screen display?
A: Printing requires a high DPI (300+) to ensure sharpness, while 72-96 DPI is sufficient for screen display. An excessively high DPI will generate unnecessarily large files, so choose based on your actual use case.
The input millimeter value must be greater than 0, and the recommended DPI range is between 72 and 600. The results do not account for bleed areas; please confirm the actual specifications with your printer before printing. This tool does not store any input data, making it safe for processing commercial design files.
We recommend using preset sizes first to avoid dimension errors. A typical example: the US standard 3.5 × 2 inches (88.9 × 50.8 mm) outputs 1050 × 600 pixels at 300 DPI. Note the conceptual difference between DPI and PPI: DPI for print refers to ink dot density, while PPI for screens refers to pixel density, though the calculation logic is the same.